欢迎您访问鼎豪弹簧五金网站!

鼎豪弹簧五金

专业研究制造各类弹簧的专业工厂
一站式弹簧制造解决方案
当前位置:首页>新闻资讯-行业动态-弹簧表面处理如何延长使用?
分类导航
联系我们
鼎豪弹簧五金 鼎豪弹簧五金

联系电话:13964843227

咨询电话:18706306739

联系地址:青岛市即墨市,北安办事处南600米路西

弹簧表面处理如何延长使用?
文章来源:http://www.sdzbthc.com/ 发布时间:2021-08-18 浏览次数:
与酸性或盐类溶液接触,这类溶液都是电解质,由于济南不锈钢弹簧表面的缺陷或杂质等原因而形成电位差不同的电以致济南不锈钢弹簧不断受到电解腐蚀;又例如济南不锈钢弹簧处在潮湿中,由于中的水蒸气在济南不锈钢弹簧表面上凝成水膜或水珠,加上中的腐蚀性气体(如工业废气中的二氧化硫和硫化氢或海洋中的盐雾等)溶解于水膜或水珠中形成电解质。
  
  Contact with acidic or salt solutions, which are electrolytes. Due to defects or impurities on the surface of Jinan stainless steel spring, electricity with different potential difference is formed, resulting in continuous electrolytic corrosion of Jinan stainless steel spring; For another example, Jinan stainless steel spring is in humidity, because the water vapor in the condenses into water film or water drop on the surface of Jinan stainless steel spring, plus the corrosive gas in the (such as sulfur dioxide and hydrogen sulfide in industrial waste gas or salt fog in the ocean) dissolves in the water film or water drop to form electrolyte.
  
  10.jpg
  
  再加上济南不锈钢弹簧金属的杂质或缺陷亦可形成电位差不同的电,在制造、存放、使用等过程中,经常会遭受周围介质的腐蚀。由于济南不锈钢弹簧在工作时是靠弹力发挥作用,济南不锈钢弹簧被腐蚀后弹力会发生改变而丧失功能。
  
  In addition, the impurities or defects of Jinan stainless steel spring metal can also form electricity with different potential differences. It is often corroded by the surrounding medium in the process of manufacturing, storage and use. Because Jinan stainless steel spring works by elastic force, the elastic force of Jinan stainless steel spring will change and lose its function after corrosion.
  
  所以防止济南不锈钢弹簧的腐蚀可以济南不锈钢弹簧的工作稳定,并延长其使用寿命。把光亮剂B放入有粗磨料的振动光饰机或六角滚筒内(济南不锈钢弹簧与精磨料的体积比为1:3,光亮剂B的用量为济南不锈钢弹簧重量的1%--2%左右,时间越长越亮)抛光后,取出用清水洗净晾干即可,这样济南不锈钢弹簧表面如镀镍一般光亮照人,褪色。
  
  Therefore, preventing the corrosion of Jinan stainless steel spring can stabilize the work of Jinan stainless steel spring and prolong its service life. Put the brightener B into the vibrating polishing machine or hexagonal roller with coarse abrasive (the volume ratio of Jinan stainless steel spring to fine abrasive is 1:3, the dosage of brightener B is about 1% - 2% of the weight of Jinan stainless steel spring, and the longer the time, the brighter). After polishing, take it out and wash it with clean water and dry it. In this way, the surface of Jinan stainless steel spring is bright and faded like nickel plating.
  

 
  Jinan stainless steel spring
  
  济南不锈钢弹簧灰尘以及易除掉垢用肥皂、弱洗剂或用温水洗涤,标签及贴膜用温水、弱洗涤剂来擦洗,脂肪、油、润滑油污染用柔和的布或纸擦干以后用中性的洗涤剂或氨溶液或用洗涤品来洗涤。
  
  Jinan stainless steel spring dust and easy to remove scale shall be washed with soap, weak detergent or warm water, labels and films shall be scrubbed with warm water and weak detergent, fat, oil and lubricating oil pollution shall be wiped dry with soft cloth or paper, and then washed with neutral detergent or ammonia solution or washing products.