欢迎您访问鼎豪弹簧五金网站!

鼎豪弹簧五金

专业研究制造各类弹簧的专业工厂
一站式弹簧制造解决方案
当前位置:首页>新闻资讯-行业动态-热轧弹簧扁钢规格基础介绍
分类导航
联系我们
鼎豪弹簧五金 鼎豪弹簧五金

联系电话:13964843227

咨询电话:18706306739

联系地址:青岛市即墨市,北安办事处南600米路西

热轧弹簧扁钢规格基础介绍
文章来源:http://www.sdzbthc.com/ 发布时间:2021-11-24 浏览次数:
热轧弹簧扁钢主要用于制造汽车、拖拉机、铁路运输等机械上的钢板弹簧。扁钢按其形状分为两种:平面弹簧扁钢和单面双槽弹簧扁钢。弹簧用热轧扁钢的
Hot rolled spring flat steel is mainly used to manufacture leaf springs for automobiles, tractors, railway transportation and other machinery. Flat steel is divided into two types according to its shape: plane spring flat steel and single-sided double groove spring flat steel. Hot rolled flat steel for springcontrolled on the pass, not as the acceptance condition.
平面弹簧扁钢的规格尺寸应符合表2—8的规定。
The specifications and dimensions of flat spring steel shall comply with the provisions in table 2-8.
平面弹簧扁钢的允许偏差应符合表2-9的规定。
The allowable deviation of flat spring steel shall comply with the provisions in table 2-9.
山东弹簧厂
经供需双方协议,供应其他截面形状的扁钢时,其宽度和厚度的允许偏差亦可按表2-7的规定。
Through the agreement between the supplier and the buyer, when supplying flat steel with other section shapes, the allowable deviation of width and thickness can also be in accordance with table 2-7.
单面双槽扁钢的尺寸应符合表2-10的规定。
The size of single side double groove flat steel shall comply with the provisions in table 2-10.
单面双槽扁钢允许偏差应符合表2-1l的规定。
The allowable deviation of single side double groove flat steel shall comply with the provisions in table 2-1l.
双槽的不对称度不大于2mm。扁钢宽度和槽底厚度的允许偏差可供需双方协议制定。
The asymmetry of double groove shall not be greater than 2mm. The allowable deviation of flat steel width and groove bottom thickness can be determined by agreement between the supplier and the buyer.