欢迎您访问鼎豪弹簧五金网站!

鼎豪弹簧五金

专业研究制造各类弹簧的专业工厂
一站式弹簧制造解决方案
当前位置:首页>新闻资讯-行业动态-扭转弹簧不同的领域有什么作用?
分类导航
联系我们
鼎豪弹簧五金 鼎豪弹簧五金

联系电话:13964843227

咨询电话:18706306739

联系地址:青岛市即墨市,北安办事处南600米路西

扭转弹簧不同的领域有什么作用?
文章来源:http://www.sdzbthc.com/ 发布时间:2021-12-29 浏览次数:
这些弹簧通常很密,但铣削之间有减少摩擦的螺距。抵抗旋转或旋转外力。根据应用要求设计扭转弹簧的旋转方向(顺时针或逆时针),以确定旋转方向,各密圈紧密包围或分离,可适应扭转载荷(垂直于弹簧轴),末端可以缠绕钩形或直扭臂。扭转弹簧根据使用领域的不同,起着不同的作用,具体表现如下:
These springs are usually dense, but there is a pitch to reduce friction between milling. Resist rotation or external rotating forces. The rotation direction (clockwise or counterclockwise) of the torsion spring is designed according to the application requirements to determine the rotation direction. Each dense ring is closely surrounded or separated to adapt to the torsion load (perpendicular to the spring axis), and the end can be wound with hook or straight torsion arm. The torsion spring plays different roles according to different application fields, as shown below:
1、扭转弹簧用作力的测量因素,如测力计、弹簧秤上的弹簧等,负载和变形的比率称为刚度,刚度越大,弹簧越硬。
1. Torsion spring is used as a force measurement factor, such as dynamometer, spring on spring scale, etc. the ratio of load and deformation is called stiffness. The greater the stiffness, the harder the spring.
2、使用扭转弹簧储存和输出能量作为动力(例如,时钟弹簧等)。
2. Use torsion springs to store and output energy as power (e.g. clock springs, etc.).
3、扭簧控制机器的运动,如内燃机的阀门弹簧、离合器的控制弹簧等。
3. Torsion spring controls the movement of the machine, such as valve spring of internal combustion engine, control spring of clutch, etc.
4、扭簧吸收振动和冲击能量,如汽车、火车车厢下的缓冲弹簧、联轴器上的吸尘弹簧等。
4. Torsion springs absorb vibration and impact energy, such as buffer springs under cars and train carriages, dust suction springs on couplings, etc.
一、扭转弹簧的应用:
1、 Application of torsion spring:
一般应用:别针、带夹的笔记本电脑、后挡板和车库门、扭转弹簧还适用于铰链、平衡体和夹点复位装置,扭转弹簧的大小也各不相同。对于用于电子设备的小型弹簧和座椅控制器的大型弹簧,应根据旋转方向对弹簧施加载荷,而不是在自由位置以外的位置旋转弹簧。弹簧旋转时直径变短,黄体变长,设计空间受到限制。要考虑到这一点。扭转弹簧有杆或管支撑时工作性能较好,设计时考虑摩擦和力臂偏移对扭矩的影响。
General application: pin, notebook computer with clip, rear baffle and garage door, torsion spring is also suitable for hinge, balance body and pinch reset device, and the size of torsion spring is also different. For small springs for electronic equipment and large springs for seat controls, the spring shall be loaded according to the direction of rotation, rather than rotating the spring in a position other than the free position. When the spring rotates, the diameter becomes shorter, the corpus luteum becomes longer, and the design space is limited. Take this into account. When the torsion spring is supported by rod or tube, its working performance is better. The influence of friction and force arm offset on torque is considered in design.
二、扭转弹簧构型:
2、 Torsion spring configuration:
设计扭转弹簧以促进旋转并产生角度弹性时,请使用黄圈紧密接触。力臂配置有多个选项。这样可以用不同的方式固定。对于扭转弹簧,需要考虑的力臂规格包括力臂角度、等力臂长度和力臂端点封口类型,以及同一侧的直线或平行。
When designing torsion springs to promote rotation and produce angular elasticity, use yellow rings for close contact. There are several options for the force arm configuration. This can be fixed in different ways. For torsion springs, the force arm specifications to be considered include force arm angle, equal force arm length and force arm end sealing type, as well as straight or parallel on the same side.
以上就是工艺品渔具弹簧给大家分享的主要内容,更多的精彩内容请大家继续关注我们:http://www.sdzbthc.com
The above is the main content of handicraft fishing gear spring to share with you. Please continue to pay attention to us for more wonderful contents: http://www.sdzbthc.com