欢迎您访问鼎豪弹簧五金网站!

鼎豪弹簧五金

专业研究制造各类弹簧的专业工厂
一站式弹簧制造解决方案
当前位置:首页>新闻资讯-技术与应用-弹簧的切边加工工艺相关过程分享
分类导航
联系我们
鼎豪弹簧五金 鼎豪弹簧五金

联系电话:13964843227

咨询电话:18706306739

联系地址:青岛市即墨市,北安办事处南600米路西

弹簧的切边加工工艺相关过程分享
文章来源:http://www.sdzbthc.com/ 发布时间:2022-05-07 浏览次数:
  弹簧应该是我们生活中经常能见到用到的物品了,当然了弹簧的种类也是非常多的,在不同的行业中应用着。那么你知道弹簧的切边加工工艺是怎样的吗?
  Spring should be our life can often see the use of the article, of course, the kinds of spring is also very many, in different industries. So do you know what the cutting process of spring is?
  通过对零件结构进行分析,可以采取水平方向弹性压紧、垂直方向直切的方式,将大、小圆弧分步切除,即切大、小圆弧时,均将零件垂直定位在定位块上,由上、下模在垂直方向进行冲切。定位块分大、小圆弧2件,切圆弧时,每次装夹2件成形的零件(左向件),依靠大、小圆弧定位块分别进行定位,然后由侧向的弹性压紧装置压紧两边的零件。
  By analyzing the structure of the parts, the large and small arcs can be cut step by step by means of elastic pressing in the horizontal direction and direct cutting in the vertical direction, that is, when cutting the large and small arcs, the parts are positioned vertically on the positioning block, and the upper and lower die are cut in the vertical direction. The positioning block is divided into two parts, big and small arc. When cutting the arc, two parts (left parts) are clamped each time. The positioning block is positioned respectively by the large and small arc, and then the parts on both sides are pressed by the lateral elastic pressing device.
  两边的零件完成一次冲切后,将其取出,并调换2个零件位置,再次放入两侧圆弧定位块中定位压紧,进行另一侧圆弧的冲切。完成左向件的加工后,将大、小圆弧定位块分别旋转180°安装,重复上述步骤完成右向件的冲裁。
  After the parts on both sides complete a blanking, take them out, and change the position of the two parts, and put them into the circular positioning block on both sides again for positioning and pressing, and blanking the circular on the other side. After finishing the machining of the left part, install the large and small circular positioning blocks by rotating 180° respectively, and repeat the above steps to complete the blanking of the right part.
  铁合金是常用的弹簧材料,受欢迎的合金有高碳材料、油淬回火的低碳、铬硅、铬钒和不锈钢。有时用来制造弹簧的其他金属有铍铜合金、磷青铜和钛。橡胶或氨基甲酸乙酯可用于圆柱形,非螺旋弹簧。在非常高温的环境中,已经开发了用于螺旋弹簧的陶瓷材料。
  Ferroalloys are commonly used as spring materials. Popular alloys include high carbon materials, oil quenched and tempered low carbon, chromium-silicon, chromium-vanadium, and stainless steel. Other metals sometimes used to make springs are beryllium copper, phosphor bronze, and titanium. Rubber or urethane can be used for cylindrical, non-spiral springs. Ceramic materials have been developed for helical springs at very high temperatures.
  山东弹簧厂人员认为对于弹簧的外形设计,很多专业人员已经开发出了各种数学方程来描述弹簧的特性,基于诸如线材成分和尺寸、弹簧圈直径、线圈数量和预期外力的量等因素。这些方程已被纳入计算机软件,以简化设计过程。
  The staff of Shandong Spring Factory believes that for the shape design of spring, many professionals have developed various mathematical equations to describe the characteristics of spring, based on factors such as wire composition and size, spring coil diameter, coil number and expected external force. These equations have been incorporated into computer software to simplify the design process.
  弹簧加工有冷卷、热卷等加工方式,无论钢是热卷的还是冷卷的,这个过程都会在材料中产生应力。为了释放这种应力,并使钢保持其特有的弹性,弹簧须通过回火热处理。弹簧在炉中被加热,在适当的温度下保持预定时间,然后允许缓慢冷却。弹簧在生产加工过程中的质量把控非常关键,所以弹簧厂家对质量的检测和把控是很严格的。
  Spring processing has cold coil, hot coil and other processing methods, whether the steel is hot coil or cold coil, this process will produce stress in the material. To release this stress, and to allow the steel to retain its characteristic elasticity, the spring is tempered. The spring is heated in the furnace, held at the right temperature for a predetermined time, and then allowed to cool slowly. Spring in the process of production and processing quality control is very key, so spring manufacturers of quality detection and control is very strict.
  弹簧的切边加工工艺相关过程分享就到这里了,如果您对多种类型的弹簧感兴趣想了解的话,不如直接来网站www.sdzbthc.com看看相关资讯吧。
  Spring edge-cutting processing technology related process to share here, if you are interested in a variety of types of springs to understand, it is better to go directly to the website www.sdzbthc.com to see the relevant information.