欢迎您访问鼎豪弹簧五金网站!

鼎豪弹簧五金

专业研究制造各类弹簧的专业工厂
一站式弹簧制造解决方案
当前位置:首页>新闻资讯-技术与应用-不锈钢弹簧的电解抛光以及清洗事项
分类导航
联系我们
鼎豪弹簧五金 鼎豪弹簧五金

联系电话:13964843227

咨询电话:18706306739

联系地址:青岛市即墨市,北安办事处南600米路西

不锈钢弹簧的电解抛光以及清洗事项
文章来源:http://www.sdzbthc.com/ 发布时间:2022-05-20 浏览次数:
如今弹簧的品种逐渐增多,数量不断增加。虽然市场需求很大,但我国的弹簧行业正变得越来越规范。那么不锈钢弹簧的电解抛光以及清洗事项是怎么样的呢?
Nowadays, the variety and quantity of springs are increasing gradually. Although the market demand is great, China's spring industry is becoming more and more standardized. What about the electrolytic polishing and cleaning of stainless steel spring?
不锈钢弹簧的电解抛光
Electrolytic polishing of stainless steel spring
不锈钢弹簧电解抛光以待抛工件为阳极,不溶性金属为阴极,两极同时浸入电解槽中,通以直流电产生选择性阳极溶解,工件表面逐渐平整,以增加工件表面光亮度影响。
The stainless steel spring electropolishing takes the workpiece to be polished as the anode and the insoluble metal as the cathode. The two poles are immersed in the electrolytic cell at the same time. The selective anode dissolution is generated by direct current, and the workpiece surface is gradually flat to increase the influence of the brightness of the workpiece surface.
不锈钢电解抛光是将金属工件在一定条件和一定溶液中溶解为阳极,降低金属工件表面粗糙度,产生一定金属光泽,进一步提高工件的装饰外观的工艺方法。广泛应用于家具配件、餐具、电器、航空、印刷等行业。
Electrolytic polishing of stainless steel is a process method that dissolves metal workpieces into anodes under certain conditions and solutions, reduces the surface roughness of metal workpieces, produces certain metal luster, and further improves the decorative appearance of workpieces. Widely used in furniture accessories, tableware, electrical appliances, aviation, printing and other industries.
其技术特点有以下2点:采用不锈钢电解,产品不易生锈,硬度高。抛光效率高,质量好,几分钟就能抛出高光。电解后产品表面光亮,装饰性强,大大提高了不锈钢的耐腐蚀性能。另外,不锈钢电解抛光主要针对不锈钢弹簧配件的表面光亮。
Its technical features are as follows: stainless steel electrolysis is adopted, the product is not easy to rust and has high hardness. The polishing efficiency is high and the quality is good. The highlight can be thrown out in a few minutes. After electrolysis, the product has bright surface and strong decoration, which greatly improves the corrosion resistance of stainless steel. In addition, stainless steel electropolishing is mainly aimed at the bright surface of stainless steel spring accessories.
不锈钢弹簧
不锈钢弹簧的清洗事项
Cleaning matters of stainless steel spring
1、如果有粘合剂成分太久,用酒精或有机溶液清洗。
1. If there is adhesive component for too long, clean it with alcohol or organic solution.
2、比较容易洗掉的灰尘和污渍可以用肥皂和温水清洗。
2. Dust and stains that are easy to wash off can be washed with soap and warm water.
3、我们可以用温水清洗不锈钢弹簧上的标签,达到你想要的效果。
3. We can clean the label on the stainless steel spring with warm water to achieve the effect you want.
4、如果不锈钢弹簧沾有油脂、油或润滑油,用软布或纸擦干,然后用中性清洁剂或氨水或专用清洁剂清洗。
4. If the stainless steel spring is stained with grease, oil or lubricating oil, wipe it dry with a soft cloth or paper, and then clean it with neutral cleaner or ammonia or special cleaner.
5、我们用酒精清洗指纹,然后用软布擦干,再用清水冲洗一两次。
5. We wash the fingerprints with alcohol, dry them with a soft cloth, and then rinse them with water once or twice.
6、表面污染物引起的不锈钢弹簧生锈:用10%的硝酸清洗。
6. Stainless steel spring rust caused by surface pollutants: clean with 10% nitric acid.
不锈钢弹簧的电解抛光以及清洗事项便是如此了,当然使用过程中免不了会有问题的出现,所以就需要提前做好相关的预防工作。更多内容就来关注我们的网站www.sdzbthc.com吧!
The electrolytic polishing and cleaning of stainless steel spring are like this. Of course, there will be problems in the process of use, so it is necessary to do the relevant prevention work in advance. Let's pay more attention to our website!